Picture: Meguiar's M105 Mirror Glaze Ultra-Cut Compound - 32 oz.
List Price: $32.99
Amazon.com's Price: $22.09You Save: $10.90 (33%)
as of 12/12/2017 05:58 EST Details
Availability: Usually ships in 24 hours
Save $2.00 with this coupon. Click to Display
This item ships for FREE with Super Saver Shipping.Binding: Automotive
Clothing Size: 32 Ounce
Color: Not Applicable
Manufacturer Parts Warranty Description: Parts
Number Of Items: 1
Size: 32 Ounce
Meguiar's Ultra Cut Compound
Meguiar’s M105 Ultra-Cut Compound is a ultra fast-cutting compound for rapid paint correction with minimal compounding swirls. Super-micro abrasives leave a "best in class" finish that requires very little finishing work. Remove a vehicle’s worst imperfections quickly with professional grade Meguiar’s M105 Ultra-Cut Compound. With Meguiar’s M105 Ultra-Cut Compound quickly remove oxidation, medium to heavy scratches, 1200 grit or finer sanding marks, water spots, bird dropping etching, and stains.
A Few Tips About Applying M105 Ultra-Cut Compound
Compounds should be applied to small areas at a time, when working either by hand, with a dual action polisher such as Meguiar's G110v2 Dual Action Polisher, or with a rotary polisher. Working small areas at a time allows concentrating on the work and maximize the efficiency of M105 Ultra-Cut Compound.
Keep the following points in mind when working with any compound like Meguiar's M105 Ultra-Cut Compound: compounds do not need to dry before removing and in fact should be wiped off immediately after working them over the finish. If they dry, the can be difficult to remove. For M105 Ultra-Cut Compound, simply go over the same area again with more M105 to re-wet the surface and then remove it while it’s still wet. Compounds need to be worked into the finish; they are not wipe on, wipe off products. Use a moderate amount of pad pressure to achieve optimum performance. Deep defects (scratches) that go through the clear coat cannot be corrected without repainting or applying touch up paint. The harder the paint and the deeper the defect, the smaller the area that should be worked at one time. Compounds remove everything off the surface of the paint including wax, so after using paint cleaner, Meguiar’s strongly recommends re-applying a protective coating of wax.
Applying M105 Ultra-Cut Compound
By Dual Action Polisher:
By Rotary Polisher:
Average Rating: none
Browse for similar items by category: